[igp-video src=""...
IMEC Articles
Tested and ready to ship: two 20hp, 175gpm Duplex Skids used to control temperature and deionized (DI) water, for use in a high tech manufacturing facility. #hightechmanufacturing #deionizedwater #deionizedcoolingskid
[igp-video src=""...
Was a beautiful weekend for rigging out old 10,000 lb boilers, to be replaced by three 6,000 MBTU high-efficiency condensing #boilers at a manufacturing plant. #boilerplantupgrade #condensingboilersystems
[igp-video src=""...
IMEC Tapped to Assist with MACOM’s Plant Expansion.
MACOM, a worldwide semiconductor and component manufacturer, has hired IMEC to assist with one aspect of its plant expansion project in Lowell, MA. Total electric and natural gas savings will total $52,000 annually.
National Grid Again Presents IMEC with Two Energy Efficiency Achievement Awards
National Grid has again presented IMEC with two awards recognizing its exemplary achievements as a Project Expeditor (PEX) producing exceptional energy-efficiency results and savings.
IMEC to Upgrade Co-Gen System at Saint-Gobain Abrasives
With IMEC’s assistance, Saint Gobain Abrasives in Worcester, MA is upgrading an on-site Powerhouse facility to pave the way to increase its CoGen capacity to 5 megawatts
Massachusetts Firms Lead a Revolution in Reducing Manufacturers’ Carbon Footprint.
When executives at Freudenberg-NOK’s 6-acre manufacturing plant in Bristol, NH began planning for a massive energy-efficiency project late in 2014, they couldn’t have dreamed of reducing the facility’s carbon footprint by 50% and saving more than $1.1 million per year on energy costs.
Garlock Printing enlists IMEC to improve plant air quality.
Garlock Printing, a leading commercial printer in Gardner, Massachusetts, has tapped IMEC for a major renovation of its press room to improve ventilation and air quality for employees while reducing energy costs.
President Joe D’Ambrosio speaks at National Grid event
Last week, IMEC president and director of engineering, Joe D’Ambrosio, was invited to speak to a group of the largest manufacturers in Rhode Island about the conception and design of efficient mechanical systems. Joe’s focus was on taking a scientific approach to solving mechanical challenges, and designing and building systems that benefit everyone by dramatically cutting energy costs and reducing the carbon footprint of manufacturing facilities.
IMEC wins 2015 Innovative Project of Year Award from AEENE
On Wednesday May 6, president and director of engineering Joe D’Ambrosio, Sr. and team accepted the award for Innovative Energy Project of the Year from the Association of Energy Engineers of New England at the Annual New England Energy Awards at the Embassy Suites Hotel in Waltham. D’Ambrosio also made a presentation about the challenges, solutions, and energy efficiency features of the winning heat recovery project for Cains Foods.
Freudenberg in Bristol, NH embarks on massive $3 million overhaul of plant heating system with design and implementation by IMEC.
With the assistance of the mechanical engineering design/build firm IMEC in Ayer, MA, the Freudenberg factory’s legacy system, which employs obsolete high pressure steam boilers and #6 fuel oil, is being scrapped in favor of leading-edge design and technology. The plant’s entire heating load will be replaced with efficient liquefied natural gas (LNG), initially phased in by employing propane as a bridge fuel.